耐高温贴片DC电源插座,全铜DC电源插座DC-091DC插座
designation品名:dc socket | model型号: | edition版本:01 | page页码:1 of 2 |
1.0构造tectonic | |||
a型状、尺寸依照制品图而规定. | |||
b外观:各部位应良好无秤锈、裂痕、电镀不良现象. appearance : the good parts should weigh no rust, cracks, electroplating ill. | |||
2.0使用环境条件the use of environmental conditions | |||
a环境湿度humidity:25℃~+70℃ | |||
b相对湿度relative humidity:≤93% (+40℃) | |||
c机械性能mechanical properties | |||
d动作力power moves:3~25n | |||
e端子强度terminal strength 各端子在各方面承受500克力作用下,在10秒内,无脱落、破损等不良现象,但弯曲也可. the terminals in all aspects under 500caledon role, in 10 seconds, without any loss, damage and other negative phenomena, but also bending. | |||
4.0电气性能electrical performance | |||
a额定电流current ratings:dc 12v1a . | |||
b接触电阻contact resistance:50mω以下. | |||
c绝缘电阻insulation resistance: 在端子之间各端子与壳之间加ac 500v条件下,持续1分钟测试.100mω以上.the terminal between the terminal and shell in between 500v ac conditions, sustained a minute test ω m above .100. | |||
d抵抗电压resistance voltage: 在端子之间端子与壳之间加ac 500v 60hz条件下,持续1分钟测量.无击穿现象出现.in between the terminal and the terminal shell in between ac 500v 60hz conditions, sustained a minute measurement. no breakdown phenomenon. | |||
5.0可靠性试验reliability test | |||
a寿命试验life test 以涂有薄层润滑脂的插头(涂润滑脂防止摩擦过热)以每分钟15~20次,无负载插座拨出5,000次,符合规格3.0和4.0规定值.coated with a thin layer of grease plugs (tu grease prevent friction overheated) per minute to 15 ~ 20, a no-load socket allocated 5,000, with the specifications 3.0 and 4.0 provides value | |||
b温度试验temperature test 将插座放置于40±2℃,相对温度90%~95%环境中,96个小时后取出,取去水滴,将插座放置于常温常湿环境中,于30分钟内测试,符合规格3.0和4.0要求.socket to be placed on the 40 ±2℃, relative humidity of 90% ~ 95% of the environment, 96 hours after the removal, taking a drop of water, will be placed in the socket temperature often wet environment, in the test within 30 minutes, with 3.0 and 4.0 specifications re | |||
| |||
| |||
|
c耐热试验heat test 将插座放置于70±2℃环境下,96个小时后取出,将插座放置于常温常湿环境中,于30分钟内测定,符合规格3.0和4.0要求.socket to be placed on the 70 ±2℃environment, 96 hours after the removal of sockets placed on the temperature and moisture environment, within 30 minutes measured with 3.0 and 4.0 specifications re |
d耐寒试验hardy trial |
将插座放置于-40±3℃环境中,96个小时后取出,取去水滴,将插座放置于常温湿环境中.于30分钟内测定,符合规格3.0和4.0要求. socket to be placed on the 40 ±3℃environment, 96 hours after the removal, taking a drop of water, will be placed in the socket regular temperature and humidity environment. within 30 minutes measured with 3.0 and 4.0 specifications re
|
5.5耐焊接热试验thermal resistance welding test 插座耐焊接热试验中,符合规格3.0和平共处4.0要求. socket welding thermal resistance test, with the specifications required 4.0 3.0 peaceful coexistence. |
a自动焊;温度235±5℃,时间5±1秒.automatic welding; temperature of235℃± 5, ± a time five seconds. |
b人动焊;温度350±10℃,时间3±0.5秒.people to welding; the temperature of 350 ±10℃for 3 ± 0.5 seconds. |
本产品的加工定制是否,品牌是HJ,型号是DC-091,额定电流是1(A),额定电压是12(V),环境温度是耐高温260度(℃),壳体材质是尼龙,PBT,LCP,ABS,导电体材质是磷铜,猛钢,产品认证是ROHS,REACH
联系方式
- 地址:东莞 东莞市桥头镇田新社区商业街60号
- 邮编:523521
- 电话:13712896873
- 经理:陈溪煌
- 手机:13751281893
- 传真:86 0769 81026590
- Email:hz.cxh@163.com